我在 Kubernetes 中设置了一个由 3 个主/从 Artemis 2.17.0 组成的集群，配置如下：
<?xml version="1.0"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<configuration xmlns="urn:activemq" xmlns:xi="http://www.w3.org/2001/XInclude" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:activemq /schema/artemis-configuration.xsd">
<core xmlns="urn:activemq:core" xsi:schemaLocation="urn:activemq:core ">
<name>activemq-artemis-master-0</name>
<persistence-enabled>true</persistence-enabled>
<!-- this could be ASYNCIO, MAPPED, NIO
ASYNCIO: Linux Libaio
MAPPED: mmap files
NIO: Plain Java Files
-->
<journal-type>ASYNCIO</journal-type>
<paging-directory>data/paging</paging-directory>
<bindings-directory>data/bindings</bindings-directory>
<journal-directory>data/journal</journal-directory>
<large-messages-directory>data/large-messages</large-messages-directory>
<journal-datasync>true</journal-datasync>
<journal-min-files>2</journal-min-files>
<journal-pool-files>10</journal-pool-files>
<journal-device-block-size>4096</journal-device-block-size>
<journal-file-size>10M</journal-file-size>
<!--
This value was determined through a calculation.
Your system could perform 1.1 writes per millisecond
on the current journal configuration.
That translates as a sync write every 911999 nanoseconds.
Note: If you specify 0 the system will perform writes directly to the disk.
We recommend this to be 0 if you are using journalType=MAPPED and journal-datasync=false.
-->
<journal-buffer-timeout>100000</journal-buffer-timeout>
<!--
When using ASYNCIO, this will determine the writing queue depth for libaio.
-->
<journal-max-io>4096</journal-max-io>
<!--
You can verify the network health of a particular NIC by specifying the <network-check-NIC> element.
<network-check-NIC>theNicName</network-check-NIC>
-->
<!--
Use this to use an HTTP server to validate the network
<network-check-URL-list>http://www.apache.org</network-check-URL-list> -->
<!-- <network-check-period>10000</network-check-period> -->
<!-- <network-check-timeout>1000</network-check-timeout> -->
<!-- this is a comma separated list, no spaces, just DNS or IPs
it should accept IPV6
Warning: Make sure you understand your network topology as this is meant to validate if your network is valid.
Using IPs that could eventually disappear or be partially visible may defeat the purpose.
You can use a list of multiple IPs, and if any successful ping will make the server OK to continue running -->
<!-- <network-check-list>10.0.0.1</network-check-list> -->
<!-- use this to customize the ping used for ipv4 addresses -->
<!-- <network-check-ping-command>ping -c 1 -t %d %s</network-check-ping-command> -->
<!-- use this to customize the ping used for ipv6 addresses -->
<!-- <network-check-ping6-command>ping6 -c 1 %2$s</network-check-ping6-command> -->
<!-- how often we are looking for how many bytes are being used on the disk in ms -->
<disk-scan-period>5000</disk-scan-period>
<!-- once the disk hits this limit the system will block, or close the connection in certain protocols
that won't support flow control. -->
<max-disk-usage>90</max-disk-usage>
<!-- should the broker detect dead locks and other issues -->
<critical-analyzer>true</critical-analyzer>
<critical-analyzer-timeout>120000</critical-analyzer-timeout>
<critical-analyzer-check-period>60000</critical-analyzer-check-period>
<critical-analyzer-policy>HALT</critical-analyzer-policy>
<page-sync-timeout>2244000</page-sync-timeout>
<!-- the system will enter into page mode once you hit this limit.
This is an estimate in bytes of how much the messages are using in memory
The system will use half of the available memory (-Xmx) by default for the global-max-size.
You may specify a different value here if you need to customize it to your needs.
<global-max-size>100Mb</global-max-size>
-->
<acceptors>
<!-- useEpoll means: it will use Netty epoll if you are on a system (Linux) that supports it -->
<!-- amqpCredits: The number of credits sent to AMQP producers -->
<!-- amqpLowCredits: The server will send the # credits specified at amqpCredits at this low mark -->
<!-- amqpDuplicateDetection: If you are not using duplicate detection, set this to false
as duplicate detection requires applicationProperties to be parsed on the server. -->
<!-- amqpMinLargeMessageSize: Determines how many bytes are considered large, so we start using files to hold their data.
default: 102400, -1 would mean to disable large mesasge control -->
<!-- Note: If an acceptor needs to be compatible with HornetQ and/or Artemis 1.x clients add
"anycastPrefix=jms.queue.;multicastPrefix=jms.topic." to the acceptor url.
See https://issues.apache.org/jira/browse/ARTEMIS-1644 for more information. -->
<!-- Acceptor for every supported protocol -->
<acceptor name="artemis">tcp://0.0.0.0:61616?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;amqpMinLargeMessageSize=102400;protocols=CORE,AMQP,STOMP,HORNETQ,MQTT,OPENWIRE;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpDuplicateDetection=true</acceptor>
<!-- AMQP Acceptor. Listens on default AMQP port for AMQP traffic.-->
<acceptor name="amqp">tcp://0.0.0.0:5672?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=AMQP;useEpoll=true;amqpCredits=1000;amqpLowCredits=300;amqpMinLargeMessageSize=102400;amqpDuplicateDetection=true</acceptor>
<!-- STOMP Acceptor. -->
<acceptor name="stomp">tcp://0.0.0.0:61613?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=STOMP;useEpoll=true</acceptor>
<!-- HornetQ Compatibility Acceptor. Enables HornetQ Core and STOMP for legacy HornetQ clients. -->
<acceptor name="hornetq">tcp://0.0.0.0:5445?anycastPrefix=jms.queue.;multicastPrefix=jms.topic.;protocols=HORNETQ,STOMP;useEpoll=true</acceptor>
<!-- MQTT Acceptor -->
<acceptor name="mqtt">tcp://0.0.0.0:1883?tcpSendBufferSize=1048576;tcpReceiveBufferSize=1048576;protocols=MQTT;useEpoll=true</acceptor>
</acceptors>
<security-settings>
<security-setting match="#">
<permission type="createNonDurableQueue" roles="amq"/>
<permission type="deleteNonDurableQueue" roles="amq"/>
<permission type="createDurableQueue" roles="amq"/>
<permission type="deleteDurableQueue" roles="amq"/>
<permission type="createAddress" roles="amq"/>
<permission type="deleteAddress" roles="amq"/>
<permission type="consume" roles="amq"/>
<permission type="browse" roles="amq"/>
<permission type="send" roles="amq"/>
<!-- we need this otherwise ./artemis data imp wouldn't work -->
<permission type="manage" roles="amq"/>
</security-setting>
</security-settings>
<address-settings>
<!-- if you define auto-create on certain queues, management has to be auto-create -->
<address-setting match="activemq.management#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>
<!-- with -1 only the global-max-size is in use for limiting -->
<max-size-bytes>-1</max-size-bytes>
<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
<auto-create-jms-queues>true</auto-create-jms-queues>
<auto-create-jms-topics>true</auto-create-jms-topics>
</address-setting>
<!--default for catch all-->
<address-setting match="#">
<dead-letter-address>DLQ</dead-letter-address>
<expiry-address>ExpiryQueue</expiry-address>
<redelivery-delay>0</redelivery-delay>
<redistribution-delay>60000</redistribution-delay>
<!-- with -1 only the global-max-size is in use for limiting -->
<max-size-bytes>-1</max-size-bytes>
<message-counter-history-day-limit>10</message-counter-history-day-limit>
<address-full-policy>PAGE</address-full-policy>
<auto-create-queues>true</auto-create-queues>
<auto-create-addresses>true</auto-create-addresses>
<auto-create-jms-queues>true</auto-create-jms-queues>
<auto-create-jms-topics>true</auto-create-jms-topics>
</address-setting>
</address-settings>
<addresses>
<address name="DLQ">
<anycast>
<queue name="DLQ"/>
</anycast>
</address>
<address name="ExpiryQueue">
<anycast>
<queue name="ExpiryQueue"/>
</anycast>
</address>
</addresses>
<!-- Uncomment the following if you want to use the Standard LoggingActiveMQServerPlugin pluging to log in events
<broker-plugins>
<broker-plugin class-name="org.apache.activemq.artemis.core.server.plugin.impl.LoggingActiveMQServerPlugin">
<property key="LOG_ALL_EVENTS" value="true"/>
<property key="LOG_CONNECTION_EVENTS" value="true"/>
<property key="LOG_SESSION_EVENTS" value="true"/>
<property key="LOG_CONSUMER_EVENTS" value="true"/>
<property key="LOG_DELIVERING_EVENTS" value="true"/>
<property key="LOG_SENDING_EVENTS" value="true"/>
<property key="LOG_INTERNAL_EVENTS" value="true"/>
</broker-plugin>
</broker-plugins>
-->
<cluster-user>clusterUser</cluster-user>
<cluster-password>aShortclusterPassword</cluster-password>
<connectors>
<connector name="activemq-artemis-master-0">tcp://activemq-artemis-master-0.activemq-artemis-master.svc.cluster.local:61616</connector>
<connector name="activemq-artemis-slave-0">tcp://activemq-artemis-slave-0.activemq-artemis-slave.svc.cluster.local:61616</connector>
<connector name="activemq-artemis-master-1">tcp://activemq-artemis-master-1.activemq-artemis-master.svc.cluster.local:61616</connector>
<connector name="activemq-artemis-slave-1">tcp://activemq-artemis-slave-1.activemq-artemis-slave.svc.cluster.local:61616</connector>
<connector name="activemq-artemis-master-2">tcp://activemq-artemis-master-2.activemq-artemis-master.svc.cluster.local:61616</connector>
<connector name="activemq-artemis-slave-2">tcp://activemq-artemis-slave-2.activemq-artemis-slave.svc.cluster.local:61616</connector>
</connectors>
<cluster-connections>
<cluster-connection name="activemq-artemis">
<connector-ref>activemq-artemis-master-0</connector-ref>
<retry-interval>500</retry-interval>
<retry-interval-multiplier>1.1</retry-interval-multiplier>
<max-retry-interval>5000</max-retry-interval>
<initial-connect-attempts>-1</initial-connect-attempts>
<reconnect-attempts>-1</reconnect-attempts>
<message-load-balancing>ON_DEMAND</message-load-balancing>
<max-hops>1</max-hops>
<!-- scale-down>true</scale-down -->
<static-connectors>
<connector-ref>activemq-artemis-master-0</connector-ref>
<connector-ref>activemq-artemis-slave-0</connector-ref>
<connector-ref>activemq-artemis-master-1</connector-ref>
<connector-ref>activemq-artemis-slave-1</connector-ref>
<connector-ref>activemq-artemis-master-2</connector-ref>
<connector-ref>activemq-artemis-slave-2</connector-ref>
</static-connectors>
</cluster-connection>
</cluster-connections>
<ha-policy>
<replication>
<master>
<group-name>activemq-artemis-0</group-name>
<quorum-vote-wait>12</quorum-vote-wait>
<vote-on-replication-failure>true</vote-on-replication-failure>
<!--we need this for auto failback-->
<check-for-live-server>true</check-for-live-server>
</master>
</replication>
</ha-policy>
</core>
<core xmlns="urn:activemq:core">
<jmx-management-enabled>true</jmx-management-enabled>
</core>
</configuration>
我正在使用 JmsTemplate 将消息发送到名为QUEUE.service2.12345.notification的队列，并使用 JmsListener 来使用通配符队列QUEUE.*.*.notification中的消息。我注意到来自通配符队列QUEUE.*.*.notification的消息的目标字段与非通配符队列QUEUE.service2.12345.notification中相应消息的目的地保持相同，这对我有好处因为我需要原始目的地的信息。但是，我面临两个问题：
- QUEUE.service2.12345.notification中的消息永远不会被确认或删除，尽管通配符队列QUEUE.*.*.notification中的相应消息被正确使用、确认和删除。如何配置QUEUE.service2.12345.notification以在将消息重新路由到通配符队列后自动删除它们？
- 如果消费者死亡并重新连接到 Artemis 集群，很有可能它会重新连接到不同的 Artemis 节点，因此消息重新分发将开始。然而，与在同一个 Artemis 节点内路由到通配符队列不同，这次消息的目的地是被覆盖为通配符队列（QUEUE.*.*.notification）。为什么通配符重新路由在这种情况下表现不同？无论如何我可以告诉阿尔忒弥斯保留原来的目的地吗？