我正在使用 Raspberry Pi 4 并尝试使用 A9G GSM/GPRS+GPS 模块访问 Internet。
起初我已经安装
ppp了sudo apt-get install ppp screen elinks我
rnet在路径中创建了一个名称为的文件/etc/ppp/peers/rnet：
# My APN internet.vodafone.gr
connect "/usr/sbin/chat -v -f /etc/chatscripts/gprs -T internet.vodafone.gr"
# Communication port:
/dev/ttyS0
# Baudrate
9600
# Assumes that your IP address is allocated dynamically by the ISP.
noipdefault
# Try to get the name server addresses from the ISP.
usepeerdns
# Use this connection as the default route to the internet.
defaultroute
# Makes PPPD "dial again" when the connection is lost.
persist
# Do not ask the remote to authenticate.
noauth
# No hardware flow control on the serial link with GSM Modem
nocrtscts
# No modem control lines with GSM Modem
local
gprs在路径中的文件中，/etc/chatscripts/gprs我添加了需要我的"MY_4_DIGIT_PIN"的行：
ABORT BUSY
ABORT VOICE
ABORT "NO CARRIER"
ABORT "NO DIALTONE"
ABORT "NO DIAL TONE"
ABORT "NO ANSWER"
ABORT "DELAYED"
ABORT "ERROR"
# cease if the modem is not attached to the network yet
ABORT "+CGATT: 0"
"" AT
TIMEOUT 12
OK ATH
OK ATE1
# +CPIN provides the SIM card PIN
OK AT+CPIN="MY_4_DIGIT_PIN"
# +CFUN may allow to configure the handset to limit operations to
# GPRS/EDGE/UMTS/etc to save power, but the arguments are not standard
# except for 1 which means "full functionality".
#OK AT+CFUN=1
OK AT+CGDCONT=1,"IP","\T","",0,0
OK ATD*99#
TIMEOUT 22
CONNECT ""
所以当我试图启动rnet文件时：
sudo pon rnet
我在 syslog ( ) 中收到此错误消息cat /var/log/syslog | grep pppd：
Oct 14 18:14:22 raspberrypi pppd[3063]: pppd 2.4.7 started by pi, uid 0
Oct 14 18:14:35 raspberrypi pppd[3063]: Connect script failed
Oct 14 18:15:06 raspberrypi pppd[3063]: Connect script failed
Oct 14 18:15:37 raspberrypi pppd[3063]: Connect script failed
...
当我尝试运行以下 AT 命令时，该模块似乎工作正常并且能够连接到网络：
AT
OK
AT+CPIN?
+CPIN:READY
OK
AT+CREG?
+CREG: 1,1
OK
AT+CGATT?
+CGATT:1
OK
AT+COPS?
+COPS: 0,2,"20205"
AT+CGACT?
+CGACT: 1, 1
AT+HTTPGET="http://www.example.com/"
OK
HTTP/1.1 200 OK
...
所以我不明白我是否在文件中写错了rnet东西，或者是我做错了什么。如果您有任何想法，请帮助我。